Last updated on 2026-10-29 04:03:46 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 0.9.6 | 10.13 | 118.07 | 128.20 | OK | |
| r-devel-linux-x86_64-debian-gcc | 0.9.6 | 7.35 | 82.02 | 89.37 | OK | |
| r-devel-linux-x86_64-fedora-clang | 0.9.6 | 83.67 | OK | |||
| r-devel-linux-x86_64-fedora-gcc | 1.0.0 | 135.62 | OK | |||
| r-devel-windows-x86_64 | 0.9.6 | 14.00 | 126.00 | 140.00 | OK | |
| r-patched-linux-x86_64 | 0.9.6 | 9.11 | 108.05 | 117.16 | OK | |
| r-release-linux-x86_64 | 0.9.6 | 9.96 | 108.32 | 118.28 | OK | |
| r-release-macos-arm64 | 1.0.0 | 2.00 | 51.00 | 53.00 | ERROR | |
| r-release-macos-x86_64 | 1.0.0 | 7.00 | 217.00 | 224.00 | ERROR | |
| r-release-windows-x86_64 | 0.9.6 | 14.00 | 202.00 | 216.00 | OK | |
| r-oldrel-macos-arm64 | 1.0.0 | 2.00 | 33.00 | 35.00 | ERROR | |
| r-oldrel-macos-x86_64 | 1.0.0 | 6.00 | 185.00 | 191.00 | ERROR | |
| r-oldrel-windows-x86_64 | 0.9.6 | 18.00 | 156.00 | 174.00 | OK |
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [17s/19s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> library(testthat)
> library(TesiproV)
>
> test_check("TesiproV")
OC curve computed | ConformityType = 'dim_k||n' | n = 10
[TesiproV::MC_IS] The active Future plan is sequential.
Computation will run sequentially.
To enable parallel execution, set a parallel Future plan, for example:
future::plan(future::multicore, workers = 4)
Saving _problems/test_MC_IS_chunk_reproducibility-54.R
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
Parametric fit insufficient (R^2 = 1.0000 < 1.0000) - using the empirical distribution.
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 53.7361 Sd = 4.8771 (numerical approximation)
Posterior : Mean = 53.6776 Sd = 4.8598
[ FAIL 1 | WARN 0 | SKIP 35 | PASS 650 ]
══ Skipped tests (35) ══════════════════════════════════════════════════════════
• On CRAN (34): 'test-bug-mc.R:120:3', 'test-bug-misc.R:52:3',
'test-bug-misc.R:74:3', 'test-bug-qualcon.R:49:3', 'test-bug-subset.R:43:3',
'test-bug-subset.R:58:3', 'test-bug-subset.R:73:3',
'test-bug-system-mcc-mcsus.R:11:3', 'test-bug-system-mcc-mcsus.R:72:3',
'test-bug-system-mcc-mcsus.R:130:3', 'test-bug-system-mcc-mcsus.R:224:3',
'test-bug-system-smooth.R:26:3', 'test-bug-system-smooth.R:57:3',
'test-bug-system-smooth.R:88:3', 'test_MCIS_system.R:129:3',
'test_MCIS_system.R:309:3', 'test_MCIS_system.R:350:3',
'test_MCIS_system.R:1128:3', 'test_MCIS_system.R:1275:3',
'test_MCIS_system.R:1296:3', 'test_MC_IS_single.R:4:5',
'test_MC_IS_single.R:79:5', 'test_MC_IS_single.R:158:5',
'test_Methods.R:56:3', 'test_Methods.R:92:3', 'test_Methods.R:174:3',
'test_Methods.R:251:3', 'test_Methods.R:311:3', 'test_Methods_addDist.R:6:3',
'test_Methods_lnorm_x0.R:7:3', 'test_Spaethe_System.R:10:3',
'test_basevars.R:429:3', 'test_basevars.R:450:3', 'test_methods_extra.R:8:3'
• PSOCK-specific check; run on Windows. (1):
'test_MC_IS_backend_contract.R:113:5'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test_MC_IS_chunk_reproducibility.R:51:5'): MC_IS results are bit-identical across Future worker counts ──
Expected `res_seq[fields_to_compare]` to be identical to `res_multi[fields_to_compare]`.
Differences:
`actual$pf`: 0.00003397596959671357
`expected$pf`: 0.00003397596959671346
`actual$log_pf`: -10.2898570597996670
`expected$log_pf`: -10.2898570597996706
`actual$cov_mc`: 0.04419786894937733
`expected$cov_mc`: 0.04419786894937749
`actual$ESS`: 2063.1267702372052
`expected$ESS`: 2063.1267702372015
`actual$ESS_ratio`: 0.20631267702372053
`expected$ESS_ratio`: 0.20631267702372016
[ FAIL 1 | WARN 0 | SKIP 35 | PASS 650 ]
Error:
! Test failures.
Execution halted
Flavor: r-release-macos-arm64
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [50s/72s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> library(testthat)
> library(TesiproV)
>
> test_check("TesiproV")
OC curve computed | ConformityType = 'dim_k||n' | n = 10
Saving _problems/test_FORM_Rackwitz-317.R
Saving _problems/test_FORM_Rackwitz-393.R
[TesiproV::MC_IS] The active Future plan is sequential.
Computation will run sequentially.
To enable parallel execution, set a parallel Future plan, for example:
future::plan(future::multicore, workers = 4)
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
Parametric fit insufficient (R^2 = 1.0000 < 1.0000) - using the empirical distribution.
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 53.7361 Sd = 4.8771 (numerical approximation)
Posterior : Mean = 53.6776 Sd = 4.8598
[ FAIL 2 | WARN 0 | SKIP 35 | PASS 649 ]
══ Skipped tests (35) ══════════════════════════════════════════════════════════
• On CRAN (34): 'test-bug-mc.R:120:3', 'test-bug-misc.R:52:3',
'test-bug-misc.R:74:3', 'test-bug-qualcon.R:49:3', 'test-bug-subset.R:43:3',
'test-bug-subset.R:58:3', 'test-bug-subset.R:73:3',
'test-bug-system-mcc-mcsus.R:11:3', 'test-bug-system-mcc-mcsus.R:72:3',
'test-bug-system-mcc-mcsus.R:130:3', 'test-bug-system-mcc-mcsus.R:224:3',
'test-bug-system-smooth.R:26:3', 'test-bug-system-smooth.R:57:3',
'test-bug-system-smooth.R:88:3', 'test_MCIS_system.R:129:3',
'test_MCIS_system.R:309:3', 'test_MCIS_system.R:350:3',
'test_MCIS_system.R:1128:3', 'test_MCIS_system.R:1275:3',
'test_MCIS_system.R:1296:3', 'test_MC_IS_single.R:4:5',
'test_MC_IS_single.R:79:5', 'test_MC_IS_single.R:158:5',
'test_Methods.R:56:3', 'test_Methods.R:92:3', 'test_Methods.R:174:3',
'test_Methods.R:251:3', 'test_Methods.R:311:3', 'test_Methods_addDist.R:6:3',
'test_Methods_lnorm_x0.R:7:3', 'test_Spaethe_System.R:10:3',
'test_basevars.R:429:3', 'test_basevars.R:450:3', 'test_methods_extra.R:8:3'
• PSOCK-specific check; run on Windows. (1):
'test_MC_IS_backend_contract.R:113:5'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test_FORM_Rackwitz.R:317:3'): RACK: FORM auto loest die Beispiele 5, 7, 9 und 11 ──
Expected `ps$runMachines()` not to throw any warnings.
Actually got a <simpleWarning> with message:
[FORM/auto] no convergence with SLSQP and iHLRF (crit_kkt = 2.19e-04, crit_g = 9.14e-09, tol = 1.0e-05)
── Failure ('test_FORM_Rackwitz.R:393:3'): RACK: FORM auto stimmt fuer alle Beispiele mit den Literaturwerten ueberein ──
Expected `ps$runMachines()` not to throw any warnings.
Actually got a <simpleWarning> with message:
[FORM/auto] no convergence with SLSQP and iHLRF (crit_kkt = 2.19e-04, crit_g = 9.14e-09, tol = 1.0e-05)
[ FAIL 2 | WARN 0 | SKIP 35 | PASS 649 ]
Error:
! Test failures.
Execution halted
Flavor: r-release-macos-x86_64
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [31s/28s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> library(testthat)
> library(TesiproV)
>
> test_check("TesiproV")
OC curve computed | ConformityType = 'dim_k||n' | n = 10
[TesiproV::MC_IS] The active Future plan is sequential.
Computation will run sequentially.
To enable parallel execution, set a parallel Future plan, for example:
future::plan(future::multicore, workers = 4)
Saving _problems/test_MC_IS_chunk_reproducibility-54.R
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
Parametric fit insufficient (R^2 = 1.0000 < 1.0000) - using the empirical distribution.
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 53.7361 Sd = 4.8771 (numerical approximation)
Posterior : Mean = 53.6776 Sd = 4.8598
[ FAIL 1 | WARN 0 | SKIP 35 | PASS 650 ]
══ Skipped tests (35) ══════════════════════════════════════════════════════════
• On CRAN (34): 'test-bug-mc.R:120:3', 'test-bug-misc.R:52:3',
'test-bug-misc.R:74:3', 'test-bug-qualcon.R:49:3', 'test-bug-subset.R:43:3',
'test-bug-subset.R:58:3', 'test-bug-subset.R:73:3',
'test-bug-system-mcc-mcsus.R:11:3', 'test-bug-system-mcc-mcsus.R:72:3',
'test-bug-system-mcc-mcsus.R:130:3', 'test-bug-system-mcc-mcsus.R:224:3',
'test-bug-system-smooth.R:26:3', 'test-bug-system-smooth.R:57:3',
'test-bug-system-smooth.R:88:3', 'test_MCIS_system.R:129:3',
'test_MCIS_system.R:309:3', 'test_MCIS_system.R:350:3',
'test_MCIS_system.R:1128:3', 'test_MCIS_system.R:1275:3',
'test_MCIS_system.R:1296:3', 'test_MC_IS_single.R:4:5',
'test_MC_IS_single.R:79:5', 'test_MC_IS_single.R:158:5',
'test_Methods.R:56:3', 'test_Methods.R:92:3', 'test_Methods.R:174:3',
'test_Methods.R:251:3', 'test_Methods.R:311:3', 'test_Methods_addDist.R:6:3',
'test_Methods_lnorm_x0.R:7:3', 'test_Spaethe_System.R:10:3',
'test_basevars.R:429:3', 'test_basevars.R:450:3', 'test_methods_extra.R:8:3'
• PSOCK-specific check; run on Windows. (1):
'test_MC_IS_backend_contract.R:113:5'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test_MC_IS_chunk_reproducibility.R:51:5'): MC_IS results are bit-identical across Future worker counts ──
Expected `res_seq[fields_to_compare]` to be identical to `res_multi[fields_to_compare]`.
Differences:
`actual$pf`: 0.00003397596959671357
`expected$pf`: 0.00003397596959671346
`actual$log_pf`: -10.2898570597996670
`expected$log_pf`: -10.2898570597996706
`actual$cov_mc`: 0.04419786894937733
`expected$cov_mc`: 0.04419786894937749
`actual$ESS`: 2063.1267702372052
`expected$ESS`: 2063.1267702372015
`actual$ESS_ratio`: 0.20631267702372053
`expected$ESS_ratio`: 0.20631267702372016
[ FAIL 1 | WARN 0 | SKIP 35 | PASS 650 ]
Error:
! Test failures.
Execution halted
Flavor: r-oldrel-macos-arm64
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [48s/68s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> library(testthat)
> library(TesiproV)
>
> test_check("TesiproV")
OC curve computed | ConformityType = 'dim_k||n' | n = 10
Saving _problems/test_FORM_Rackwitz-317.R
Saving _problems/test_FORM_Rackwitz-393.R
[TesiproV::MC_IS] The active Future plan is sequential.
Computation will run sequentially.
To enable parallel execution, set a parallel Future plan, for example:
future::plan(future::multicore, workers = 4)
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
Parametric fit insufficient (R^2 = 1.0000 < 1.0000) - using the empirical distribution.
updateBasevar complete.
Prior : Mean = 38.9400 Sd = 6.1116 (numerical approximation)
Posterior : Mean = 38.8125 Sd = 6.0511
OC curve computed | ConformityType = 'dim_k||n' | n = 20
updateBasevar complete.
Prior : Mean = 53.7361 Sd = 4.8771 (numerical approximation)
Posterior : Mean = 53.6776 Sd = 4.8598
[ FAIL 2 | WARN 0 | SKIP 35 | PASS 649 ]
══ Skipped tests (35) ══════════════════════════════════════════════════════════
• On CRAN (34): 'test-bug-mc.R:120:3', 'test-bug-misc.R:52:3',
'test-bug-misc.R:74:3', 'test-bug-qualcon.R:49:3', 'test-bug-subset.R:43:3',
'test-bug-subset.R:58:3', 'test-bug-subset.R:73:3',
'test-bug-system-mcc-mcsus.R:11:3', 'test-bug-system-mcc-mcsus.R:72:3',
'test-bug-system-mcc-mcsus.R:130:3', 'test-bug-system-mcc-mcsus.R:224:3',
'test-bug-system-smooth.R:26:3', 'test-bug-system-smooth.R:57:3',
'test-bug-system-smooth.R:88:3', 'test_MCIS_system.R:129:3',
'test_MCIS_system.R:309:3', 'test_MCIS_system.R:350:3',
'test_MCIS_system.R:1128:3', 'test_MCIS_system.R:1275:3',
'test_MCIS_system.R:1296:3', 'test_MC_IS_single.R:4:5',
'test_MC_IS_single.R:79:5', 'test_MC_IS_single.R:158:5',
'test_Methods.R:56:3', 'test_Methods.R:92:3', 'test_Methods.R:174:3',
'test_Methods.R:251:3', 'test_Methods.R:311:3', 'test_Methods_addDist.R:6:3',
'test_Methods_lnorm_x0.R:7:3', 'test_Spaethe_System.R:10:3',
'test_basevars.R:429:3', 'test_basevars.R:450:3', 'test_methods_extra.R:8:3'
• PSOCK-specific check; run on Windows. (1):
'test_MC_IS_backend_contract.R:113:5'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test_FORM_Rackwitz.R:317:3'): RACK: FORM auto loest die Beispiele 5, 7, 9 und 11 ──
Expected `ps$runMachines()` not to throw any warnings.
Actually got a <simpleWarning> with message:
[FORM/auto] no convergence with SLSQP and iHLRF (crit_kkt = 2.19e-04, crit_g = 9.14e-09, tol = 1.0e-05)
── Failure ('test_FORM_Rackwitz.R:393:3'): RACK: FORM auto stimmt fuer alle Beispiele mit den Literaturwerten ueberein ──
Expected `ps$runMachines()` not to throw any warnings.
Actually got a <simpleWarning> with message:
[FORM/auto] no convergence with SLSQP and iHLRF (crit_kkt = 2.19e-04, crit_g = 9.14e-09, tol = 1.0e-05)
[ FAIL 2 | WARN 0 | SKIP 35 | PASS 649 ]
Error:
! Test failures.
Execution halted
Flavor: r-oldrel-macos-x86_64